联系电话:

您当前位置:古天乐代言太阳集团>工程动态工程动态

吊顶天花喷绘常识有哪些

太阳集团44118备用址:2016-10-31 09:52:56 发表编辑:phpcms 浏览次数:

软膜天花的喷绘常识有哪些
What are the common printing soft film smallpox
软膜天花的喷绘常识有哪些?下面就跟随软膜小编来聊聊吧!
What are the soft film smallpox printing knowledge? Here follow piamater small talk about!
第一,专门为喷绘软膜而设计制造的喷绘机,不是所有的喷绘机都能喷绘软膜。
First, for printing film and inkjet printer design and manufacture, not all printer can print film.
第二,软膜因为不含经纬线,比较软、薄,膜的行走速度和喷绘机滚轴的速度常常不一致,产生明显的“PASS线”。
Second, piamater because of excluding the latitude and longitude lines, soft, thin film, walking speed and printing machine roller speed is often not consistent, have obvious "PASS line".
第三,软膜材料喷上油墨后会因受腐蚀而变形、鼓起,鼓起部分会和喷头摩擦,产生破坏性“刮痕”。喷绘画面色彩越浓,软膜受腐蚀的程度越大,刮花的情况越常见。
Third, piamater material sprayed ink will be due to corrosion and deformation, and the nozzle part will muster muster, friction, destructive "scratch". Painting color more thick, soft corrosion degree is bigger, scratch the more common.
第四,光面软膜不适合用于喷绘,一是不吸墨不易晾干;二是画面很容易被抹掉;三是PASS线明显。
Fourth, smooth film is not suitable for printing, a holdout is not easy to dry; two pictures are easily wiped out; three is the PASS line obviously.
第五,有些透光软膜不宜用于喷绘,可能太软、太薄,或者生产厂家的设备不够好。喷绘前把软膜拉出4-5米,平摊在地面,如果两边有明显的“荷叶边”,这软膜就不适合用于喷绘。
Fifth, some light is not suitable for soft printing, may be too soft, too thin, or the manufacturer's equipment is not good enough. The film is pulled out 4-5 meters before printing, flat on the ground, if both sides have obvious leaf edge, this film is not suitable for printing.
第六,深蓝色或者深灰色画面,特别容易产生PASS线,原因暂时不明。
Sixth, dark blue or dark gray screen, in particular, is likely to produce PASS line, the reason is unknown.
第七,软膜伸缩性比较强,喷绘时受到滚轴拉伸变长,喷绘后回缩,加上油墨腐蚀软化作用,喷绘完成的软膜实际尺寸一般比现场尺寸要短,因此,软膜喷绘一定要根据画面色彩、长度等适当放量。
Seventh, soft film flexibility, by printing roller stretched and printing after retraction, and ink corrosion softening effect, the soft film printing is complete in general than the actual size of the field size should be short, therefore, must be appropriate to put a soft printing amount according to color, length etc..
决定软膜喷绘质量的因素:
Soft printing quality factors:
一、喷绘文件的精度。接到客户喷绘文件后,用PS打开文件,放大到1:1(打印尺寸),确保文件精度符合要求,避免不必要的麻烦。
First, the accuracy of printing documents. After receiving the customer printing file, open the file with PS, up to 1:1 (print size), to ensure that documents accuracy meets the requirements, to avoid unnecessary trouble.
二、专业的软膜喷绘企业。专业软膜喷绘的要求是1440dpi(每平方英寸的点数)和6PASS,普通喷绘企业对此了解重视不够,有的企业和操作工为了节省时间和油墨,可能达不到要求,降低软膜喷绘的质量。往返喷绘企业送材料取材料也是很头疼的事。
Two, professional film printing company. Professional film printing is 1440dpi (per square inch points) and 6PASS, the ordinary printing company knows enough attention, some companies and operators in order to save time and ink, may not reach the requirements, reduce the quality of film printing. From the printing company to send material material is also a big headache.
三、高精度喷绘机器。软膜的材料性质和喷绘要求与普通广告布相差很大,喷头高度的调节也不尽相同,市面上多数广告喷绘企业的机器达不到喷绘软膜的要求,常见的户外写真机精度为720dpi。
Three, high precision printing machine. Material properties and printing requirements of piamater and ordinary advertising cloth vary greatly, nozzle height adjustment is not the same, most of the market of advertising printing machine company is not up to the requirements of printing film, outdoor photo machine precision common 720dpi.
四、专业并且有责任心的制图人员。客户给大家的喷绘文件格式多钟多样,制图人员要能准确转换成喷绘机可以接受并且不影响喷绘质量的文件。客户给大家的图片文件尺寸常常和实际要求的尺寸不完全一致,制图人员必须有足够的责任心才能及时发现错误并予以纠正,避免出错。
Four, professional and responsible for the mapping staff. Give us your printing file format clock diversity, drawing personnel to be able to convert the printer can accept and does not affect the quality of printing documents. The size of the image file that the customer gives us is not exactly the same as the size of the actual requirement. The drawing staff must have enough responsibility to find the error in time and correct it.
五、为客户利益负责的喷绘机操作人员。普通广告企业的喷绘机操作工通常使用的喷绘材料是有经纬线的广告布,开机喷绘后就可以去睡觉、看电视、玩游戏等等,而喷绘软膜必须时刻盯着机器及时调整(有时候需要2-3人同时操作)。否则,大家拿到的喷绘软膜要么就是PASS线很明显,要么就是有很多刮花,造成大量的材料浪费。高浓度底色的软膜天花喷绘,有时候材料浪费可能达到50%以上。
Printing machine operator five, is responsible for the interests of customers. Printing machine operator ordinary advertising company commonly used printing materials are longitudinal advertising cloth, printing after the boot can go to sleep, watch TV, play games and so on, and printing film must keep an eye on the machine (sometimes the need for timely adjustment of 2-3 people at the same time). Otherwise, we get the printing film or PASS line is very obvious, or that there are many scratches, resulting in a large number of waste materials. High concentration color inkjet film, sometimes the material waste could reach more than 50%.
XML 地图 | Sitemap 地图